GLi router’s uboot has a web interface. In case you made something wrong with your firmware, you can eventually save your router by flashing the default firmware back using uboot WebUI. The processes of entering the webUI for different routers are a little different, but almost the same. The common procedure: Connect only one cable to […]
The Tor firmware downloaded from our website only route connections from ssid – “Tor” to the tor network. If you want to router all connection from LAN to the Tor network, you need to duplicate the configuration. Here is the detailed guidance.
Some users want to use GL.iNet as repeater, connect to their main router using Wi-Fi, and use the Tor network. Unfortunately, there was an unknown problem in the old Tor firmware, preventing it to display the available SSIDs. We recompiled the Tor firmware based on Openwrt 1407. The new firmware can be downloaded from here. Here is […]
Here is a simple guidance of how to use DDWRT with GL-iNet if you want to use ddwrt firmware.
Finally we got time to make the version with external antenna. It is online for sale in our Amazon and Ebay shop. The antenna is 5db and pre-mounted. It is directly soldered to the PCB without IPX connector.
Original source code can be found here: https://github.com/grugq/portal and here is another good instructions to make a Tor firmware https://disman.tl/2014/09/13/transparent-tor-gateway-on-openwrt.html. We put here a simple instruction to make a tor firmware for Gl.iNet.
From v41621, there is no need to patch openwrt again. Thanks to: Mark Janssen Michel Stempin Gabor Juhos You can find GL.iNet target if you compile the source code. This make it easier to make your firmware.