A repeater bridge, is a combination of repeater and dumb AP. The mini router only act as a relay and connect all your devices to your main router. It doesn’t act as a gateway and dhcp server. This mode is generally used to amplify your signal distances. There are two method to build such a […]
GLi router’s uboot has a web interface. In case you made something wrong with your firmware, you can eventually save your router by flashing the default firmware back using uboot WebUI. The processes of entering the webUI for different routers are a little different, but almost the same. The common procedure: Connect only one cable to […]
You can use ddwrt in GL-MT300N and GL-MT300A. Here is one firmware that works, ddwrt for buffalo whr 300hp2 http://www.dd-wrt.com/site/support/other-downloads?path=betas%2F2016%2F03-07-2016-r29218%2Fbuffalo_whr_300hp2%2F The firmware with name “firmware.uimage” is tested. Steps to install DDWRT: You can flash this firmware to the router using the default WebUI. It passes the firmware check. After the router reboot, reconnect your network […]
Hi, thanks for our hackers, the firmware is here: https://github.com/kow/glinetpineapple
The new Tor firmware is built on top of OpenWrt CC1505. Now it comes with Domino Web UI. So you can modify your network settings easily. The download links are: Tor 6416, Tor AR150 Please refer to the attached video to learn how to flash the Tor firmware to your router. How to use: […]
Jeroen make this fun scripts to control Blink(1) mk2 using GL-AR150. The article and scripts is posted here: http://www.gl-inet.com/forums/topic/how-to-read-ans-set-gpio-values-in-gl-ar150/
GL.iNet 6416 provides more accurate result than Raspberry Pi when used as PPS+GPS+NTP server. Check Paul’s great work! http://pjrlost.blogspot.com/2015/09/ar9331-pps-gps-ntp-awesome.html
The Tor firmware downloaded from our website only route connections from ssid – “Tor” to the tor network. If you want to router all connection from LAN to the Tor network, you need to duplicate the configuration. Here is the detailed guidance.
Some users want to use GL.iNet as repeater, connect to their main router using Wi-Fi, and use the Tor network. Unfortunately, there was an unknown problem in the old Tor firmware, preventing it to display the available SSIDs. We recompiled the Tor firmware based on Openwrt 1407. The new firmware can be downloaded from here. Here is […]
Here is a simple guidance of how to use DDWRT with GL-iNet if you want to use ddwrt firmware.